First, what is the fishing reel? It’s a cylindrical instrument that gets attached to a fishing rod. It is an essential part of any fishing gear. The fishing reel is mostly used for winding line. There are numerous fishing reels in the market, such as spinning reel, baitcasting reels, and closed face reels. Closed face reels are the easiest to handle, and thus putting the line is stress-free. Therefore, they are perfect for beginners who want to attempt their hand at fishing.
As a beginner, you might need to know how to put a fishing line on a closed face reel. Follow the steps mentioned below in-depth for a better understanding.
Step 1:Classify the Line Capacity of the Reel
Anytime look at the line capacity of the reel stated on the top. Ensure you are putting a suitable line on the reel. If in any way, you put the unsuitable line on the reel, it would make the line limit the casting distance and not manageable.
Step 2: Lay Your Rod Flat and Open the Cover The Reel.
Ensure you unscrew the lid of the closed face reel and take it off. You should know that not all reels need unscrewing; some have a pin and a notch that gets separated. Also, others have push-button that open up the cover automatically upon pressing.
Step3:Remove the Old Line from the Reel If Any
But as well you can choose to keep some part of the old lines so that you can ascribe the new line for a long cast. This means the old line can act as a backup.
Step 4: Tie the New Line to the Spool
Run the line via the eyelets or hole in the cover. The string ought to come from the end of the rod. Ensure you tie it up the new lines to the spool of the reel. Make sure to run the line from the tip to the handle. Take the assistance of the rod guide if required. If you had preferred to use the old lines as a backup, then you are supposed to tie both the strings back together with a nail knot or two clinch knots.
Step 5: Cover the Reel Back
Grip the line tight while placing the cover back once more. As you are doing so, ensure the line does not get pinched whatsoever by the cover of the reel.After you are done putting the cover back on, tightly pull the line.
Step 6: Reel the New Line on the Reel
First, ensure the spool is well laid on the ground. This is done to make sure the lines emanate off the spool properly as it goes on your reel. The purpose of this process is to ensure there is no twisting of the line. Prudently grasp the line tight using one hand and begin reeling the procedure of the new line on the reel. Ensure you are maintaining maximum tension on the line for the reel to be very tight. If the line is not tight, then casting problems may arise. Always reel the line at a gentle and stable pace.
Step 7: Fill Spool to 1/8 Inch of the Lid
Make sure not to place an excessive line on the reel. If you want the reel not to get overloaded with the line, then you should open the reel lid every 15 to 20 seconds. You should always keep in mind that reel grasps less line when compared to other types of reels. As you replace the old line with new string on being careful not to pinch it.
Step 8: Run the Line and Tie Ab Lure Using Line Guide
Through proper line guide, there is no doubt you can tie lure of your choice. You are now fully prepared for a fishing adventure. But ensure to grasp the reel while casting. Gripping the reel makes you pinch the line between your fingers. As well, this entire process assists in keeping the string tight when reeling using alight lure.
Step 9: Remove Twists and Tangles from the Line
Make sure there are no tangles and twists on the line while you do the reeling process. For the reel to back gently, lay the string on flat ground. Ensure there are no problems at the end of the line.
Placing a fishing line correctly on the reel ensures hassle-free and well-organized angling experience. Therefore, you should follow the steps mentioned above to know how to put a fishing line in a closed face reel correctly.