One of the challenges of braided lines is tying the knots due to its slick texture and lack of stretch. However, you cannot ignore the fact that the lines are useful in saltwater and those with dense vegetation. Their strength and non-stretch features make it more sensitive. If you want to enjoy the benefits of braided lines, then you have to learn how to tie them well. Otherwise, you will watch as the catch swim away with your precious hook.
Luckily, here you will learn different types of fishing knots that work best with braided lines. The tips to make the knots stronger are also provided.
The Best Fishing Knots for Braided Lines
Using common knots might not work on braided lines since it is slippery. You need the right knots that tie the braided strings to your leader, hooks, swivels and lures. Here are the strong knots you can use:
1.Double Uni Knot
If you want to tie braided lines to a leader, then the double Uni knot will work best. The monofilament and fluorocarbon that can be used as a leader are thicker compared to braided lines. Thus, other line-to-line knots such as blood knot might not work well.
To tie the two lines overlap them such that the ends face opposite directions. Now, take the braided strand and make a loop and pinch the side such that it lies along with the leader. Keeping the pitch with your left hand, wrap the tag end of the braided line around the loop and the leader ten times. Draw the circle up by pulling the tag end of braided line. You can wet the knot to cinch it tightly.
Now, turn the knot at a 180-degree angle and take the leader to make another loop. Follow the exact procedures used in making a knot with braided line to the leader.
There will be two knots each wrapped around the line on the opposite side. Keep pulling the mainline in the opposite direction simultaneously to tighten the knots snugly. You can then trim the extra string on the tag end, and the final result will be a secure knot that won’t break even when pulling a big catch.
This is a perfect knot for tying braided line to a hook, lure or swivel. Tying the knot is quite easy, with only three steps to follow. First, double the string over the tag end and insert it through the eye of the hook, lure or swivel.
Now make an overhand loop leaving the hook, lure or swivel in the middle. Lastly, thread the swivel, lure or the hooks through the double tag line. Your knot will be ready, and you will only need to wet your line and pull it to tighten well.
Watch the video:
Due to the diameter difference of braided lines and monofilament or fluorocarbon strings the Albright Knot works best. It also works best when joining two lines made of different materials. To tie the lines, make a loop using the thicker line, this is usually the leader when using braided lines. Now, run the 10² of the braided line through the loop.
Grab the lines between your index finger and the thumb. Take the braided line and wrap it over the two strands that formed the loop and itself. You should make ten tight wraps after which run the tag end of the braided line through the same side of the loop where it initially went in. Slide the wraps towards the end of the loops while holding the two ends of the leader. Now, pull the braided line to tighten and trim any extra.
Usually, the one the thicker line is the one used to make the loop and lighter one to run and wrap through.
Watch the video:
This is an improved version of the clinch knot and is suitable for tying braided lines. It works well when tying the fishing line to the hook, swivel or lures.The knot is easy to do, and you start by threading the wire through the hook’s, swivel’s or lure’s eye twice making a loop. Take the tag end and thread it through the standing line for at least ten times.
After the wraps run the tag end back through the double loop that was formed at the eye, wet the knot and pull it tightly against the eye. Now, trim any extra line, and your knot will be ready.
Watch the video:
Tips on Making Fishing Knots Strong for Braided Lines
Due to the slippery nature of braided lines, they can give in to pressure if the knot is not secure. The above knots work well but can be improved by following the tips highlighted below:
- Before tying the knot, you should run through the braided line through the hooks eye twice. This reduces slippage by creating an additional point of friction.
- Double wraps from those recommended for other lines. Since the braided lines are lighter and slippery making twice the wrap number make it stronger without adding bulk.
- Moisten the knots before pulling the line tight. Lubricating the knots makes wraps fall in place, making it stronger when tension is applied.
- After tying the knot, test them. You will notice any flaws if any and rectifying before using it in water. This prevents any chance of losing your hooks, lure and swivel while watching your dream catch swim away.
The slippery and slick texture of braided lines won’t prevent you from using them once you master the above knots. Braided lines have great benefits, and nothing should stop you from utilizing the same. The four knots explained above are easy to tie and with the videos provided your work will be easy.
Besides, utilizing the tips given here to make your knot stronger to stand up to any pressure in the water. Even if the fish presents a tough fight, it won’t break your line. Thus, a guarantee of always securing your valuable hooks, lures and swivels.
James is a professional kayaker and his hobby is fishing! He has been fishing for last 5 years and he loves using Kayaks while outing as well. Based on his experiences with the different type of Kayaks; he is sharing his opinion about various kayaks so that a beginner can get started right away. Find him on Twitter here. Happy reading!